It’s happened to all of us. You’ve just gotten back from an amazing holiday or weekend away only to find that you’r geyser burst.
What to do…
Charles Pillay, head of SOSCall24, a division of Diversity Empowerment shares the following tips to follow if you suspect your geyser is faulty or it burst:
- Switch off the water supply to your property
Find the valve for the main water supply for your property and switch it off immediately. This will stop more water more flooding into the geyser and hopefully curtail some of the water damage to your ceiling and property.
- Turn off the geyser switch on your main electrical board
Your next step is turn off the power supply to the geyser – it’s usually a labelled switch on the main electrical board in your home. Turn the mains off if you can’t identity the switch for the geyser.
- Open the hot water taps
Open the hot water taps will drain the remaining water from the geyser, releasing the pressure in the cylinder and limiting damage to your home and possessions from leaked water.
- Phone your insurer
If you have home insurance cover, phone your insurer to find out what your policy covers and if there is a preferred plumber you should call. You might also want to check whether the geyser is under warranty, in which case the manufacturer may need to be involved.
- Call a 24-hour plumber
A problem with your geyser is a job for a qualified plumber registered with the Plumbing Industry Registration Board. The plumber will be able to identify and fix the problem, whether it is actually the geyser, or another issue like a burst water pipe. The plumber will also give a certificate of compliance if installation of a new geyser proves to be necessary.
Prevention is better than cure
You can reduce the chances of – and mitigate the damage caused by- a burst geyser following some basic maintenance tips:
- Ensure there is a drip tray that can drain leaked water to prevent damage to your home or possessions.
- Have a plumber inspect the geyser every three to four years to make sure components like anode rods are in good condition.
- Don’t set the thermostat above 70 degrees Celsius – ideal settings are 50 degrees in summer and 60 degrees in winter.
